Sectors / Industrial sites
Industrial & manufacturingSee where the power goes, shift by shift.
Industrial bills are driven by peaks, time bands and capacity as much as by the units you use. We measure your site at the incoming supply, find the waste and the expensive peaks, and give you the controls to keep them down.
What we hear most
Peaks and time bands
Start-ups and shift overlaps pushing demand into the most expensive time bands.
Out-of-hours load
Compressors, heating, lighting and idle machines running when nothing is being made.
Capacity and reactive charges
Agreed capacity set too high or too low, and reactive power charges from poor power factor.
Complex bills
Half-hourly bills with dozens of lines that nobody has the time to check.
Measure, plan, install, control
One team from the first reading to the final saving.
- 1
Check the bills
A free check of 12 months of half-hourly bills: tariff, capacity, reactive power, network charges, VAT and levies.
- 2
Measure the site
An Energy Fingerprint gives your site’s load shape: base load, shift peaks, start-up spikes and what runs overnight.
- 3
Fix the big items
Costed measures in your report, from controls and LED to batteries and solar, installed by GridUnlock.
- 4
Keep control
The Identic EMS alerts you to anomalies, shifts load with batteries and solar, and reports savings against your baseline.
The services that fit
Industrial sites: common questions
Can you install monitoring without a shutdown?
In most cases, yes. The reader uses split-core current clamps that fit around the incoming cables without disconnecting them. Our engineers confirm the safest method during the site survey, and any work is planned around production.
We already have a half-hourly meter. Why measure again?
Half-hourly data shows totals every 30 minutes. A Fingerprint reader measures every few seconds, which shows the start-up spikes, short peaks and machine-level patterns that a 30-minute average hides, and it gives you live data rather than data weeks later.
What is a reactive power charge?
Some half-hourly supplies are charged when the site draws a lot of reactive power, usually because of motors and other inductive equipment. It shows on the bill as a separate line. The bill check flags it, and the Fingerprint shows whether power-factor correction would pay back.
Do batteries make sense for an industrial site?
Where demand is peaky or tariffs vary a lot through the day, a battery can cut peak charges and store solar for later. Your Fingerprint report models the saving on your own load data before you commit.
Start with your site’s Fingerprint.
30 days of measured load at your incoming supply, then a report with costed improvements.
- From £299 + VAT, or included in a 24-month plan
- Reader installed within 14 days
- We call you back within one working day
Prefer to talk? 0114 504 7198 · info@identic.energy
GridUnlock installs batteries, solar PV, LED lighting, controls and EV charging on working industrial sites, planned around production so the line keeps running.
Batteries · Solar PV · EV charging · LED lighting · Controls